Hunter Cobra

mooreken · #1 (**permalink**) 12-10-2008, 07:39 AM

Thanks for the info. I found the Metz builder at the Turkey Rod Run, and took a lot of pictures. As I get along you should hear from me again.

Ken

ENTDOC · #2 (**permalink**) 12-10-2008, 08:46 AM

I found My experience with the Hunter kit and Randy Hunter to be a good one. The car performed very well and was solid with no rattles. You will not find a lot of people to bounce things off of during the build process but Randy will always help. It was an easy build actually and the kit lends itself to changing things to suit your needs. I went with the upgraded rear end and it was not really needed. I still think the car had the best stance of any I have ever seen.

mooreken · #3 (**permalink**) 12-11-2008, 09:07 AM

Thanks, Randy will talk your leg off about Cobra's. I got the standard rear end and this kit has the 4 coilover springs so I think it will work nice. I went with the 96" version, and there were some body to frame areas that had I had questions about. But it seems to be the same on the other kit I looked at so I will just make the changes. I also think that I can open up the cockpit area sense I am using a small block.

thanks again for the replies....Ken

mooreken · #4 (**permalink**) 12-11-2008, 09:18 AM

Thanks, Randy will talk your leg off about Cobra's. I got the standard rear end and this kit has the 4 coilover springs so I think it will work nice. I went with the 96" version, and there were some body to frame areas that had I had questions about. But it seems to be the same on the other kit I looked at so I will just make the changes. I also think that I can open up the cockpit area sense I am using a small block.

thanks again for the replies....Ken