|
S.W. gauges
Hi Bob, Doing things in my tipical fashion, I decided to check the accuracy of my temp gauges after the dash was installed. Anyway the water reads 10-15 degrees cold and the oil 15-20 degrees cold. Assuming water boils at 212 sea level is this within expected tolerance? thanks clyde
|
Clyde,
I could see the 10F variation, but much more than that seems excessive. However, %/ I can't guarantee that a replacement would be significantly better. If I had more time, I would sift through our stock to check, but that's not possible right now. If the reading is consistant, I would recommend just compensating for the difference. |
| All times are GMT -7. The time now is 05:02 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: