Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   FIA wheels with Wilwood brakes (ERA) - where to put wheels weights (http://www.clubcobra.com/forums/era-speak-bob-putnam/137854-fia-wheels-wilwood-brakes-era-where-put-wheels-weights.html)

66gtk 01-20-2017 12:56 PM

FIA wheels with Wilwood brakes (ERA) - where to put wheels weights
 
I have a 427 car with 6 PIN FIA wheels and ERA's big front brake setup (Wilwood). If I install stick on wheel weights on the back of the wheels they will interfere with the calipers. The fit is very tight back there. I really don't want to have to put weights on the outside of the wheel in visible view. Any suggestions?

peterpjb 01-20-2017 01:01 PM

1/4" spacer

strictlypersonl 01-20-2017 03:06 PM

We use thin stick-on weights right on the inside corner. I think we have to buy them from Wurth:
08301310 Wheel weight, Adhesive, 10gm non-coated
08301325 Wheel weight, Adhesive, 25gr non-coated
08301335 Wheel weight, Adhesive, 35gr non-coated
08301345 Wheel weight, Adhesive, 45gr non-coated
*I see that Cal Custom has some "low profile" weights too. Can't guarantee a fit.

RICK LAKE 01-20-2017 07:01 PM

Use Stick On weights
 
66Gkt Stick on weights with a road force and high speed balance. Weights go behind the spokes on the wheels for outters and I used clip on mag weights for the inner side. Also recommend 200 mph tape to cover weights and don't stack the weights. Been running this way since 1998 with 15" and now 17" wheels and big brakes from ERA

66gtk 01-20-2017 07:46 PM

Thanks guys. Time to talk to my tire shop. Rick Lake - do you have a photo you could share to help with your description? I'm not following.


All times are GMT -7. The time now is 03:45 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: