Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   Buddy Bar valve cover (http://www.clubcobra.com/forums/era-speak-bob-putnam/146733-buddy-bar-valve-cover.html)

oilerfish 03-18-2023 04:09 PM

Buddy Bar valve cover
 
3 Attachment(s)
Found and bought for a song a set of Buddybar valve covers.

Attachment 38669
They cleaned up pretty well with vapor blasting and happy with the look ( That air filter will find another home..).

Attachment 38670

However, someone has removed the steel tube in the oil fill side and the internal baffles from both. Thinking about filling the oil fill
hole -1 3/8" - with a Granatelli Motor Sports Valve Cover Baffle, part # 451000, this has an id of 1" so can get a breather to fit that.
That would cover the oil fill side but what do I use on the PCV side to stop oil from being sucked into the PCV valve? Id of PCV side is 1".


Attachment 38671

Blas 03-18-2023 06:38 PM

I see 2 sets on eBay. Both appear to have the internal baffles removed. Probably had rockers interfering so off they came. Probably had the longer necks added to the breathers caps.
Blas

LMH 03-18-2023 08:50 PM

In original configuration, the PCV valve goes on the left side of the engine and the oil fill/breather on the right.
Larry


All times are GMT -7. The time now is 03:05 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: