Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   dust cover on bell housing gt40 (http://www.clubcobra.com/forums/era-speak-bob-putnam/48687-dust-cover-bell-housing-gt40.html)

Lloyd GT40 01-01-2004 03:34 PM

dust cover on bell housing gt40
 
Bob

The dust cover on the bottom of the ERA bellhousing (GT40)doesn't appear to fit correctly. The radius of the opening does not match the radius of the cover. I was going to drill and tap 3 holes to hold the cover on. The two front holes are ok the middle hole is off the flat machined surface by 1/4".

Problem solved made a template from the bellhousing and trimmed cover to match. Drilled and taped looks good.

LLoyd


All times are GMT -7. The time now is 07:38 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: