|
wiring ?
Maybe I'm thinking too much but when wiring in the MSD Didital6 plus, you are supposed to connect the #43 resistor wires together then connect the msd red wire and the tach output to #40 connections (original coil) this also eliminates the need for the white wire on the solenoid. My question is can I connect the tach out directly to the signal terminal on the tach,and the red wireon the msd directly to the ign switch disconnecting the green wire presently there, then I wouldn't have to worry about running a harness out the old coil connections. Thanks for any help. Charlie B
|
Charlie,
Yes, you can make the direct connections. We like to use the original harness wires to make it easy to "go back" if something should fail. About half way down on this page shows the MSD harness that we make for in-house cars. |
| All times are GMT -7. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: