|
Era Fia Pix???
I need a couple pics if anyone has them.
#1. A good shot of the overflow tank hose routings on a carbureted, no heater car. I have mine set up but not sure of a couple of the routings. The pump to the tank...Should it go under the alternator & around the frame support or through the alt. belt opening? #2. I want to give building my own brake scoops a go. Any detailed pics of these would be helpfull. I have downloaded all I can find but most are at bad angles & dimentions aren't clear. |
Here are 2 pix of the ERA brake ducts. Sorry, no dimensions. Good luck...:)
http://www.clubcobra.com/photopost/d...25DSCN0004.JPG http://www.clubcobra.com/photopost/d...CN0001-med.JPG |
Hyde,
I am running the same set-up...carb. no heater. I ran the hose below and around the alt. but inside the frame upright. This was how several cars were set-up at ERA. |
Great! Thanks for the help guys! Any more pics or dimentions of the Ducts would be great too. Those do help a lot. From what I've read the general suggestion is to not run them on the street due to the possibility of debris being shot at the rotors. I was thinking of aiming them more to the back & the ground. I just really want the look without adding the extra wear & it sounded like a fun little metal shaping project.
|
Hello
I ordered the ducts from Cobra Restorers. But they where not to use! Therefore I ordered the ERA ducts any they where perfect! (I had only to cut them at the inside to have sufficient place for the wheels) I mounted them on my car last year and I had never any problem on the street! (I added two pictures to my gallery) Regards From Switzerland :D ALF |
Alf, what kind of cobra do you have? I've noticed on the COC Website that it must be a 289 but I couldn't find any information about it.
Regards, Daniel |
Awsome looking car ALF! Thanks!
|
Many thanks for the compliment!:D
I’m always working on it, but you’ll know this as well! ;) |
Oh, I know allready! First it will be running & then I start saving for more add-on parts:p
|
| All times are GMT -7. The time now is 03:05 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: