Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   Emblem Tape... (http://www.clubcobra.com/forums/era-speak-bob-putnam/72025-emblem-tape.html)

FrankJohnson69 08-14-2006 04:48 PM
Emblem Tape...
 
Hi Bob,

I'm looking for the two sided tape that is used to stick the 427 emblem on my pent roof valve covers. Peter said to just get "servo tape". Well, having played in the RC arena years ago I though... no prolem. Now, there's at least 20 different types of servo tape. All I need is the high temp stuff to hold those emblems on.

Any guidance would be appreciated.

Thanks,
Frank Johnson
ERA-722

cobred 08-14-2006 05:41 PM
I use 2 sided tape. Body shops us it to put emblems and body side mouldings on. I bet if you go to a body shop they would give you a piece.

FrankJohnson69 08-14-2006 07:48 PM
Body Moulding Tape
 
I've checked the temps of the body moulding tape and have found that over a little time engine heat will cause it to let go.

REDSC400 08-14-2006 08:50 PM
Mine were afixed with JBweld. First clean the back of the emblem with alcohol and then clean the chromed pent roof with acetone or alcohol. Wipe dry. Apply a think coating of JB weld to the back of the emblem evenly and then press it in position. Clean any push out with alcohol. They have been on for many years without any problem.


All times are GMT -7. The time now is 10:56 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: