Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   Weber center linkage (http://www.clubcobra.com/forums/era-speak-bob-putnam/80827-weber-center-linkage.html)

Snakebit 07-23-2007 07:53 AM
Weber center linkage
 
When I went to Carlisle this past May, the blue FIA had a new motor with Webers and acenter linkage set up. Does ERA sell the linkage as a kit or can you tell me what is needed as far as parts and where I can purchase them? Also, do you have any pictures of the linkage set up? Thanks, ERA2100

Rick Parker 07-23-2007 10:15 AM
When you say "Center Linkage" can you clarify it a little further? Did it have a bellcrank in the center of the manifold or a rod mounted in Rod Ends running through the center of the manifold?

Snakebit 07-23-2007 10:55 AM
A rod going down the center just like your are looking for. It was on a set up with opposed carbs. I wish I had taken a picture. I plotted the Kirkum set up of the old style linkage. Using 3" connecting rods center on center, the drivers side lever was set at 23 degrees pointing up to thr right, and the passanger side was set at 70 degrees pointing down to the lower right.

strictlypersonl 07-23-2007 11:58 AM
Are you looking for something like this? We make a bracket that bolts to the back of the head for the big bellcrank.

http://www.erareplicas.com/cars/142/carblink.jpg

Snakebit 07-23-2007 02:29 PM
I am looking for the center linkage that mounts to each individual carb. The dark blue FIA taht you bring to carlile every year had a new 302 with Webers and the center bar in the middle with levers connecting the carbs. Thanks.


All times are GMT -7. The time now is 01:37 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: