|
FIA trans tunnel cut out for Ricmond 5 speed
Do you have a sketch or template that shows measurements as to where to cut the hole in the top of the trans tunnel for a richmond 5 speed in an FIA?
|
Make a small drill hole in the cover
Snakebit If the measurment is not in the manual (rough) install the trans and shifter, without the handle and measure from the back of the inside the back panel to the center of the shifter assembly and do the same from either door to the center. Make sure you have the cover in location before you do the measuring. Measure twice and drill once, 1/8 hole to start. Once you are centered with the 1/8" hole, get a holedrill kit and open it up to 1/2" under the size of the rubber boot and retainer ring on all sides. Make sure the floor mount holes are all seen or put bolts in them to center the tunnel. My tunnel is 1/2" off to the left to clear the shifter rods on my 6-spd. My tunnel now has a metal plate to give the room needed and the tuneel is back in orginial location. Rick L Ps there is info in the manual in body and interior group.
|
| All times are GMT -7. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: