Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ERA---Speak with Bob Putnam (http://www.clubcobra.com/forums/era-speak-bob-putnam/)
-   -   ERA tire options (http://www.clubcobra.com/forums/era-speak-bob-putnam/94656-era-tire-options.html)

cobra de capell 02-08-2009 05:30 PM
ERA tire options
 
Bob

I have an ERA made in the late 80's - it currently has Goodyear VR50's on it (245-15 front - 265-15 rear). They are around 24" diameter. Is there a maximum tire width and diameter that will properly fit within the ERA wheel section (front and back)? I'm looking at getting billboards for my Cobra.

By the way, I've got original Halibrands - really old Halibrands.

Any input will be appreciated.

ERA Chas 02-08-2009 05:35 PM
Your exact desired set up is on my car-early Jag rear ERA, mag Halibrands and G'Years. My Halibrands' backspace was machined by Eagle Machine (neighbor to ERA). Call Peter to arrange details then buy your tires. Fit perfectly, no worries.

cobra de capell 02-09-2009 10:29 AM
Quote:
Originally Posted by ERA Chas (Post 919331)
Your exact desired set up is on my car-early Jag rear ERA, mag Halibrands and G'Years. My Halibrands' backspace was machined by Eagle Machine (neighbor to ERA). Call Peter to arrange details then buy your tires. Fit perfectly, no worries.
Question - when you state 'backspace was machined by Eagle Machine' what does that mean? Does it mean that I need to do something with my Halibrand's? I'm hoping just to find the tires and have them mounted - does my project need to go beyond that?

I really appreciate your input.

strictlypersonl 02-09-2009 12:06 PM
You should check your backspacing. The rear wheels are probably correct but the front may need some machining.

ERA Wheel Offsets

ERA Chas 02-09-2009 05:54 PM
Yes as Bob said, pull them off and measure the backspace. Then call Pete or Bob with the info and do what they tell you. It's easy and they'll be perfect.

cobra de capell 02-10-2009 10:41 AM
Thanks for the input - I'll go that route.


All times are GMT -7. The time now is 04:20 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: