|
building gen 1 E&M
Yes I am finishing a gen 1 for a guy who bought it back in 1984. He had it at another shop and they took him to the cleaners along with lost some parts so I am looking for the brackets that go from the frame into the trunk to mount the bumpers to.
Also they have a Subaru master cylinder res yet it sits at an angle and i need one that sits flat if anyone can help that would be great thanks in advance Matt |
anyone
bueller bueller lol |
I used a GM Powermaster on my EM. I had to modify the wheel tub to get it to fit properly but have had no problem with it for 13 years...http://www.gnvenom.com/images/powermaster.jpg
Hope this helps. |
Matt,
Try Fred Gimbel. Contact info here: http://www.pwrperformance.com/contact.htm#contact Fred is a master assembler of E-M Gen I cars, among other things :cool: and can most likely help you. Tom |
1 Attachment(s)
Matt,
Don't listen to Tom (:p :LOL:), the brackets that came with the kit from E-M are made of nothing more than common .125" thick angle iron. You can easily make your own. Dimensions are 1.5" x1.5"x8"L. All mounting holes are generously slotted to allow adjustment. Mike...:MECOOL: Just kidding about Tom's advice, he's spot on about Fred being able to help you. ;) |
| All times are GMT -7. The time now is 02:05 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: