|
Need Information
I need to know how to get to the driving lights to tighten them on my Coupe. The Left one is loose and I can find no way to get in there to tighten the swivel it seems to be mounted on that lets it be adjusted up or down. I am talking about the two small lights on the picture below. Thanks for any help or information anyone can give me.
Ron :confused: http://www.clubcobra.com/photopost/d...In_Carport.jpg |
If all else fails cut in from the back side???
Isn't the cavity where those mount the same place the front end pivot mounts are attached?? If it is you may have to remove the nose from the car. |
:confused:
The whole front end is one piece and removing the nose alone can't be done. When you remove the front end, the lights and everything come with it as all you do is disconnect the leads. I don't know how they put those darn things in as I can see the whole mounting cavity from inside the air intake and there are no bolts or screws that goes to the little bracket on the bottom of the lights. The only thing going into the cavity besides 4 bolts that help strengthen the front end by bolting to the frame are the lights leads. But they had to get them in there some way and by them being on a swivel to tilt them up or down I would guess there is supposed to be a way to adjust them. Ron :confused: |
Do not drive at night! :LOL:
|
Ask question here: http://www.ffcobra.com/ubb/ultimateb...forum/f/5.html
|
;)
Thanks Mike. You too Warren. Ron :p |
| All times are GMT -7. The time now is 04:19 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: