-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| wrench87 |
08-24-2010 03:58 PM |
ford fe engine cradles
does any know if they make a fe engine cradle that will let you bolt the flywheel on and bellhousing? if so who sells them.
|
| xlr8or |
08-24-2010 05:00 PM |
All you need two flat pieces of 1/4" steel and some 2X2 steel tubing. Drill and bolt the flat plate to the motor mounts then weld a piece of 2X2 going straight down mate it to another 2X2 going front to back. Basically an upside down T shape with an angled plate on top.
I believe Kieth Craft or Gessford makes/sells them.
|
| Fordzilla |
08-24-2010 05:03 PM |
|
| Fordzilla |
08-24-2010 05:07 PM |
|
| RodgerH |
08-25-2010 06:45 AM |
Quote:
Originally Posted by Fordzilla
(Post 1073874)
|
He also makes a slightly wider version for engines with a wide oil pan. I needed the wider one with my Aviaid pan.
I put wheels on my cradle so I could roll it around.
Rodger |
| Ronbo |
08-25-2010 09:01 AM |
Quote:
Originally Posted by Fordzilla
(Post 1073872)
|
Same thing here, it's a nice stand... (get the wide one if you have a t-pan)
The only thing cooler would be one with interchangable heads for different engines. |
| All times are GMT -7. The time now is 02:37 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
