|
Which Oil Filter ?
which oil filter is used with the 427 remote adpater from Finish Line and what hose should be used...
#10 or #12 ? thanks, Jon |
1/2 inch pipe.......AN 10
|
Street or track
saltshaker Jon For street driving in the summer time #10 is ok. If you are going to pound on the car or track it I would go up to #12. There is another issue, It's the fittings. Some are hiflow and others are flow killers. You may have a 1/2 line but the fitting are only 3/8 in the middle. Get hiflow fittings if possible. Summit ,Jegs, Speedway, Earls, and Aeroquip all sell fittings. They cost a little more but IMO do a better job and cause less restriction of oil flow and pressure. Rick L. Ps get a good oil filter also, see other thread about Fram filters
|
| All times are GMT -7. The time now is 10:50 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: