|
427 Remote oil filter adapter from finish line
I got one from Finish Line and it uses #8 AN fittings....do these fittings need rubber o rings to make a seal?
Jon |
As I understand, A&N fittings do not require O-rings.
|
You need to check for sure. Should be pretty straight forward. Sometimes, like mine, you do use a AN straight male coupling to connect to the adapter or remote. On mine, I did use an o ring to seal the bottom up with pipe dope too. Most times your not limited to the -8 size though. It might have that opening but then you just need the larger adapter, -8 to a -10 or -8 to -12 etc. You will know if the adapter is NPT as it will tighter way before it bottoms out, or should. Good luck, Matt
|
| All times are GMT -7. The time now is 03:29 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: