|
Edelbrock fe head owners __
Edelbrock Performer RPM head owners, - be sure to have your engine builder check the spring pressures on your valve springs.
we recently found a set that had significant pressures that would be unsuitable for anything but hydraulic roller tappet use. in addition Edelbrock moves their valve locations ( tips ) away from stock locations so roller rockers with shims packs are advised. Steve |
Yup,
Yup, And yup. In addition one of my VC holes wasn't drilled. Go figure. |
Ditto
Ditto Ditto The first time we used them the springs had 170lbs seat pressure. But why single out FE heads for mention ! Mike |
That's why I bought a bare set to build them the way I want them to be set up.
Good information, nonetheless. |
That's why I bought a bare set to build them the way I want them to be set up.
Good information, nonetheless. |
Regardless of brand, I always take apart a new set of cylinder heads and check the valve spring pressures,regardless of the advertised spring rate........
David |
| All times are GMT -7. The time now is 10:40 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: