-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| mickmate |
09-02-2011 04:33 PM |
Galaxie filter fitting
Anyone know where I can get a brass flare fitting that seats in a shoulder inside the nut on the housing? It's almost like a compression fitting sleeve but with a different taper on one end and a shoulder on the other.:confused:
I'm going to try making one for the time being.
Thanks for any help.
|
| lovehamr |
09-02-2011 05:21 PM |
MM, did you try posting that question on the FE forum?
|
| mickmate |
09-02-2011 08:54 PM |
I did not, good suggestion thanks. I actually turned one on the lathe and it even works so I'm feeling quite clever and independent right now.
|
| mickmate |
09-03-2011 08:52 PM |
Hi Fred, no I didn't even stop to get a pic I was so excited to try it. I'll see if I can shoot one down in the end of the filter.
|
| Jerry Clayton |
09-04-2011 08:08 AM |
are you talking about an inverted flare?
|
| mickmate |
09-04-2011 09:05 PM |
Yes, that mates with the flared tube end and has steps on the diameters to fit the other end into the filter.
|
| PaulProe |
09-05-2011 06:24 PM |
Fragola
|
| All times are GMT -7. The time now is 04:14 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
