-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| saltshaker |
10-29-2011 11:59 AM |
FE Headers for under car exhaust
What headers do you use, has anyone tried Sanderson headers or is there a collector that could slid on the current side pipe headers together the exhaust under the frame?
Jon
|
| mickmate |
10-29-2011 03:04 PM |
I was looking at the Sandersons but think they would need swapping sides. Get some and try them John, their quality and service are great.
|
| racco |
10-29-2011 08:44 PM |
sandersons are a no go. They will custom make you a set if you send them a sample or mock up of what you want.
|
| mickmate |
10-29-2011 09:25 PM |
Hey Racco do you think you could cut one tube out for steering clearance and redo just that one?
|
| DanEC |
10-30-2011 05:21 AM |
If not looking primarily for authenticity you might try checking with ERA. They basically use the same header system as for their sidepipe cars but use a separate lower section that turns and mates everthing together in a collector for an undercar system. I'm pretty sure they are sourced out to a fabricator and they might be willing to provide contact information. Maybe.
|
| 1GR8BOSS |
10-30-2011 06:26 AM |
Hi Jon,
We installed the Sanderson headers for undercar exhaust 6yrs ago. We had to swap sides so the pipes are pointing down, also had to cut off 6inches of straight pipe then welded on a 21/2inch collector. The guys from Sanderson were fantastic, they supplied everything that I needed. Here's a hint for you: I bought mine uncoated, did the cutting and welding then sent them out to get coated.
Rick
|
| saltshaker |
10-30-2011 07:10 AM |
Pictures
Any pictures of the ERA under frame headers?
Jon
|
| mickmate |
10-30-2011 10:03 AM |
|
| saltshaker |
10-30-2011 02:51 PM |
Slip on collector
Does anyone make a short slip on collector (would look like the collector on a shorty header) it could slip on the end of standard Cobra SC headers and a pipe could be made to come from the muffler to the collector?
Jon
|
| mickmate |
10-30-2011 05:54 PM |
Not a bad idea, take your pick
Google |
| All times are GMT -7. The time now is 02:37 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
