|
Home depot or Lowes in hardware
FWB Ted I got them about 10 years ago when still fighting my Dove setup. They came in sizes from .005"-.030" in thickness. They where machine shims. They fit perfect on the rocker shafts and I was able to get almost all the rockers centered on each valve. This was the early setups. I think they went to an off setup later. I saw something about rockers being .070" angled for better alignment. I went to erson and they lined up perfect and have been running them for 12 years. . Try a machine shop Graingers, MSC, or any of the larger Wholesale warehouses. If you can't find them, I will look for my extras and mail them to you. Rick L.
|
| All times are GMT -7. The time now is 09:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: