-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
Genesis FE block?
(
http://www.clubcobra.com/forums/fe-talk/116329-genesis-fe-block.html)
| wideglidejoe |
07-06-2012 05:17 PM |
Genesis FE block?
Anyone heard anything about Genesis FE blocks not being available? I called the "tech" # on their website today. Lady that answered the phone said the guy I needed to talk to was out until Monday. I said I had some tech ?'s and some $$ ?'s, she said it didn't matter, they didn't have any blocks in stock, and that she thought he was looking for another foundry.
Anyone heard anything?
|
| FUNFER2 |
07-06-2012 06:48 PM |
From what I heard, the partners had a disagreement and parted ways. Will either one start up again, we'll see ? Hope so !
|
| RodKnock |
07-06-2012 09:58 PM |
|
| Barry_R |
07-07-2012 06:30 AM |
I use them when I can get them - which these days is not really possible.
I know that at least one of the owners is trying to "reboot" the program, but its been a long time now and the supply has dried up.
|
| joyridin' |
07-07-2012 08:41 AM |
If somebody can find a way to buy the patterns, I can get you a foundry and machine shop that will do the complete machining (oil passages, water passages, etc.) They are located on Indiana/Ohio.
|
| Racer_X |
07-07-2012 01:48 PM |
Quote:
Originally Posted by joyridin'
(Post 1199156)
If somebody can find a way to buy the patterns, I can get you a foundry and machine shop that will do the complete machining (oil passages, water passages, etc.) They are located on Indiana/Ohio.
|
What about checking with Tod Buttermore on 351cleveland.net.
He had been working on his own revised FE block also but put it on the back burner to focus on the 351C block. I had emailed him a while back and from what I understand, he was about ready for foundry. He goes by 427Designer. tlb427351@yahoo.com
Food for thought...
Curtis |
| rpatton3 |
07-07-2012 02:33 PM |
That is what I like about you guys and this forum.
|
| All times are GMT -7. The time now is 11:56 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
