|
Need 427 piston
I need one C8AE-S piston std. This is the forged "bumper top" used in the '68 cars- I think. Anyone have one?
|
Tall order, good luck.
|
I've sold at least 5 sets, bought them on Ebay, just keep looking there, they DO come up, by the way, it's the same piston for 63-64 427, just not C8 #
|
CSX 3183- I thought they were the same, too. The 63, 64 & 65 pistons used a 5/64, 3/32,3/16 ring pack & the C8-S used a 1/16, 1/8 pack. I sleeved my early '65 motor for these '63 pistons , had everything balanced & discovered the difference. I find that NOBODY carries a 3/32 ring, & decided to use my C8 pistons (of which I only have 7 good ones). Thanks for your response anyway. Bill.
|
| All times are GMT -7. The time now is 02:50 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: