-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
edelbrock heads
(
http://www.clubcobra.com/forums/fe-talk/118852-edelbrock-heads.html)
| cobrabritt83 |
01-24-2013 09:44 AM |
edelbrock heads
I need to get a set of heads for my 427 s/o and i was thinking of getting a set of bare edelbrock heads. I know there made for the smaller 2.09/1.66 valves, but does anybody know what a ballpark figure would be for a machine shop to do the work to accept the larger 2.19/1.73 valves would cost.
|
| blykins |
01-24-2013 10:00 AM |
We sell them with all of that already done...
|
| redmt |
01-24-2013 11:07 AM |
Brent,
What kind of flow numbers are you getting with a simple port match?
|
| blykins |
01-24-2013 11:15 AM |
Usually the heads with a nice valve job and some clean up hit around 270-275. It goes up from there depending on how much effort you want to put into them, and we routinely get about 325 @ .650" with the ported heads.
|
| redmt |
01-24-2013 01:27 PM |
I got 253 x 214 @.650 with a simple port match to the BT intake and had them balanced to the best cylinder. They should get the bigger numbers without any issue.
|
| Barry_R |
01-30-2013 10:20 AM |
Have a pair of those on the shelf right now already done. Original customer went another direction. Had them on the FE forum at a discount. Drop me a PM if interested.
|
| All times are GMT -7. The time now is 07:10 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
