|
Oil pressure switch location
Does anyone knows where exactly is the oil switch in the 427 Side Oiler is located?
tks |
The oil pressure sending unit is usually on the oil filter adapter that is bolted to the left side of the block.
|
Lou,
chances are you have a plate on the motor and hoses for a oil filter relocation, it will either be plumbed off the plate and pointing front or plumbed off the oil filter housing where ever that is located on the car. the frame is in the way of using the factory adapter, so just look for a lightbulb looking fitting with one wire going to it, that is screwed into the oil line somewhere Fred |
Tks guys will look for it there.
Lou |
| All times are GMT -7. The time now is 08:24 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: