|
Edelbrock Performer Manifold for 427 FE S-O
Does anyone knows if Edelbrock manufactures a performer manifold for the 427 FE side oiler? If you know the stock or part # please let me know.
Tks Lou |
Amazing timing, Lou, as I was talking with my engine builder today about two Edelbrock Performer manifolds for an FE side-oiler.
Performer - part #2105 (4.92" height to carb pad) Performer RPM - part #7105 (5.46" height to carb pad) The Performer RPM is a better performing intake at the expense of hood clearance... Regards, Kevin |
The Performer is a turd.
You want the Performer RPM. |
Quote:
I'm going with the Performer RPM and a two-piece drop-base air cleaner that ERA provides. Once you have the engine in and know exactly how much clearance you have, the air cleaner is welded to the base at the highest possible point (leaving about 3/8" for engine torque). That way you get the most flow out of a drop-base that you can get. Regards, Kevin |
what size did the bores clean up at?..... oh hey what's a Primier contributor? .......i think you should do a spell check there on your username
|
Tks guys
Lou |
Quote:
That one bore with the surface rust cleaned up at 4.250 (.017 over). I'll be talking with Doug tomorrow with a final decision on the cam (he's doing some calculations). A Premier contributor is someone that contributed money for this site. I didn't type that in there - it is part of the membership level. Maybe one of the moderators can fix that... Regards, Kevin |
Typo on the "premier"..I fixed it. :)
|
Quote:
Regards, Kevin |
Quote:
and good on the spelling too....:D |
| All times are GMT -7. The time now is 07:03 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: