|
FE Water Pump Pulley?
My original cast iron water pump, has an aluminum pulley, with 1 1/2" center holes with 6 9/16" diameter(single grove). The pulley will not work with my Edlebrock aluminum water pump. It has 1 1/4" center holes. I only have three pulleys on this engine(water pump, balancer, & Alt). Any recommendations for a complete set of billet aluminum pulleys(single, serpentine)? I also have read diameter on the water pump pulley is crucial.
Thanks, Tom |
March pulleys will work with----
talos Tom March sells 2 different pulley setups. DON'T run the under drive setup. You want the 1-1 water pump to crankshaft. You can do what you want with the ALT. Go to CVF racing and they will have the setup of high flow for your motor. You can use either grooved belt or surp belt setup. Simple chart and part numbers for each pulley to match your motor. Also, pull the back cover and look to see if a disc is mounted to the fins on the impellor of the water pump. If not buy a kit to stop cavitation of the coolant. Good luck Ps the edel brock pump has a disc. I missed this, sorry. Rick
|
Thanks,
Tom |
Thanks,
Tom |
| All times are GMT -7. The time now is 04:08 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: