-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
427 MR cam ?s
(
http://www.clubcobra.com/forums/fe-talk/132726-427-mr-cam-s.html)
| mrlmman |
03-16-2015 04:04 PM |
427 MR cam ?s
Hello all. new to this site and have learned a lot off the knowledge here. Hope to eventually help like I have been help. I just purchased a 67 fastback with a 427 SO and need help with cam selection. Motor has been bored 25ths magged sonic checked and even lovingly stroked after I got it home. :LOL: Stock crank C4AE-H lemans rods and stock heads C5AE-F with the tunnelwedge dual quad intake. Need cam tho. I do have a very mildly ran C3AE-AA cam along with a nos crane CC-314. Called up Crane and they sent me specs card and saying duration is 314 with a valve lift of 587 both intake and exhaust with a cam timing of .0136 @ tappet. I know nothing about cams and know theres knowledge here, seen it! any suggestions on cams? I do have more info but don't know what is needed.Running original manual 4spd toploader. Thanks in advance.
|
| mrlmman |
03-16-2015 04:11 PM |
Also does anyone know what an H scratch on the back of a block means? cant figure out how to add a pic. there is one in my gallery tho!
|
| Phill Pollard |
06-03-2015 01:49 PM |
Quote:
Originally Posted by mrlmman
(Post 1342605)
Also does anyone know what an H scratch on the back of a block means? cant figure out how to add a pic. there is one in my gallery tho!
|
It probably signifies that it is a Hydraulic cam.
H=Hydraulic
S=Solid
R=Roller
Phill |
| blykins |
06-03-2015 02:14 PM |
You wanting a solid flat tappet? There's much to be gained from stepping away from the 40-50 year old cams.
|
| Bernica |
06-03-2015 04:03 PM |
Quote:
Originally Posted by blykins
(Post 1351028)
You wanting a solid flat tappet? There's much to be gained from stepping away from the 40-50 year old cams.
|
Listen to Brent...
The old AA and B cams were great a long time ago. Things have come a long way since then.;) |
| All times are GMT -7. The time now is 05:31 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
