Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Source for non-decorative crank pulley (http://www.clubcobra.com/forums/fe-talk/138098-source-non-decorative-crank-pulley.html)

120mm 03-04-2017 08:28 AM
Source for non-decorative crank pulley
 
Now that I've finalized my plans for my Cobra build, I'm looking for a source for non-decorative crank pulleys for a 428 FE.

Short of stealing one off a 352/390 in a junk yard, does someone have a link to a place I can order a plain, painted pulley?

The only accessories I plan to run is a water pump and an alternator.

Thanks!

Drew

DanEC 03-10-2017 04:46 AM
I would check with a couple of the major FE engine builders like Blykins and Craft Performance. Keith Craft built a lot of restoration motors and had stock steel pullies for mine.

http://i125.photobucket.com/albums/p...P1010154-1.jpg

undy 03-10-2017 05:02 AM
I bought mine off EPay. The aftermarket always wants to sell under-drive ones, the mortal enemy of cooling challenged FEs.

120mm 03-10-2017 08:35 AM
Quote:
Originally Posted by DanEC (Post 1417735)
I would check with a couple of the major FE engine builders like Blykins and Craft Performance. Keith Craft built a lot of restoration motors and had stock steel pullies for mine.

http://i125.photobucket.com/albums/p...P1010154-1.jpg
I may be getting my block from Keith Craft. I'll ask when I order

Quote:
Originally Posted by undy (Post 1417738)
I bought mine off EPay. The aftermarket always wants to sell under-drive ones, the mortal enemy of cooling challenged FEs.
Or "bling" chrome, Gold plated or stylized billet crap that does not fit into my scheme.

DanEC 03-10-2017 08:45 AM
No - not my thing either. I'll stick with a dual point distributor to avoid a red distributor cap on mine.

Mongoose930 03-10-2017 09:27 AM
This link has been invaluable to me. Once you find the correct P/N, you can go to ebay and start looking:

Pulley

saltshaker 03-10-2017 03:49 PM
Water pump pulley
 
I have a extra water pump pulley from a 428
Just pay the shipping
Send me a pm
Jon

ACHiPo 03-12-2017 05:37 PM
Quote:
Originally Posted by DanEC (Post 1417763)
No - not my thing either. I'll stick with a dual point distributor to avoid a red distributor cap on mine.
MSD makes a black cap?
https://www.msdperformance.com/produ...es/parts/84313

66gtk 03-12-2017 07:35 PM
I could use one, too. The one I have seems to have a thin "groove" for the belt. I also would like to obtain a factory type water pump pulley to replace my aftermarket style one.

DanEC 03-13-2017 06:05 AM
Quote:
Originally Posted by ACHiPo (Post 1417952)
But it would still be an MSD.


All times are GMT -7. The time now is 07:19 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: