Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Police interceptor intakes and CJ heads (http://www.clubcobra.com/forums/fe-talk/142962-police-interceptor-intakes-cj-heads.html)

nola_cj 11-17-2019 09:25 PM

Police interceptor intakes and CJ heads
 
Will a 1966 alum police interceptor intake (C6AE-9425-E) work with 1969 CJ heads (C8OE-6090-N)? "Work" meaning will the ports and everything match up? If not, what is the best dual plane alum intake for CJ heads? "Best" meaning ports match and is streetable ... not looking for crazy horsepower. Be kind...I'm just getting started with this stuff. :D

DanEC 11-18-2019 05:44 AM

Lots of mystery with all the FE variations but yes, an aluminum or cast iron PI intake should work with CJ heads. Most CJs used a version of the cast iron PI intake. Any mismatch at ports is minor enough not to affect performance. Here is a good article on 428 CJ manifolds.

https://www.428cobrajet.org/id-intake

nola_cj 11-21-2019 07:26 PM

Thanks. The intake came from a 69 Mustang S-code 390 car that someone morphed into a shaker hood car. The height of the shaker was perfect, so what you're saying about the PI intake being similar to the cast iron intake works for me ... I'll be putting this on my 69 R code ...that is when I have time to change out the intake. 8)

Thanks again,
Bill

tomshep 12-06-2019 12:20 AM

A PI intake is a common upgrade on a CJ in a Mustang to save weight and it keeps all the same dimensions and connections. It is a direct swap.

Tom


All times are GMT -7. The time now is 10:24 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: