-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| ERA 626 |
07-15-2020 05:59 PM |
NOS Blue Thunder MR heads
I am looking for some Blue Thunder Medium Riser heads for FE Technically They are for 428 cobra Jet they will have 428 M/R stamped on them. I know they are not made any more. A friend of mine just found a pair and they are very nice. Any one here know of a set sitting on a shelf somewhere? Let me know please, or some one to contact?
|
| ERA 626 |
07-16-2020 07:02 PM |
Not one reply? all you FE guys? I know BBM make them it looks like they just copied Blue thunder, but I want Blue thunder!!!
|
| Anthony |
07-16-2020 07:56 PM |
Ask on the ford fe forum
|
| ERA 626 |
07-17-2020 12:24 PM |
Quote:
Originally Posted by Anthony
(Post 1479817)
Ask on the ford fe forum
|
i did thank you. |
| patrickt |
07-17-2020 02:38 PM |
Quote:
Originally Posted by ERA 626
(Post 1479845)
i did thank you.
|
And the FE Power Forum.
FE Power Forum |
| ERA 626 |
07-17-2020 04:04 PM |
Quote:
Originally Posted by patrickt
(Post 1479854)
|
TRYING TO REGISTER FOR THAT SITE AND THE SECURITY QUESTION IS "Nickname for factory 2X4 single plane intake manifold" I have no clue what this is... Why do they ask this? how many people know this? SMH |
| patrickt |
07-17-2020 05:15 PM |
Quote:
Originally Posted by ERA 626
(Post 1479860)
TRYING TO REGISTER FOR THAT SITE AND THE SECURITY QUESTION IS "Nickname for factory 2X4 single plane intake manifold" I have no clue what this is... Why do they ask this? how many people know this? SMH
|
Try "Sidewinder" or maybe "Tunnel Wedge.":cool:
I just remembered that's Jay B.'s site and he wrote the definitive primer on intake manifolds. That's probably why the question is what it is. |
| 767Jockey |
07-17-2020 06:06 PM |
Quote:
Originally Posted by ERA 626
(Post 1479860)
TRYING TO REGISTER FOR THAT SITE AND THE SECURITY QUESTION IS "Nickname for factory 2X4 single plane intake manifold" I have no clue what this is... Why do they ask this? how many people know this? SMH
|
The correct answer is Tunnel Wedge. And, for whatever it's worth, BBM didn't copy the Blue Thunder heads. They're a proprietary design all their own. My 520" BBM headed FE makes 744 HP with just a little massage work in the bowl area by Blair Patrick. No port work at all. |
| patrickt |
07-17-2020 06:10 PM |
Quote:
Originally Posted by 767Jockey
(Post 1479870)
My 520" BBM headed FE makes 744 HP with just a little massage work ...
|
After driving a 700HP Cobra through downtown traffic I would think you'd need a little massage work.:cool: |
| ERA 626 |
07-17-2020 06:23 PM |
Quote:
Originally Posted by 767Jockey
(Post 1479870)
The correct answer is Tunnel Wedge. And, for whatever it's worth, BBM didn't copy the Blue Thunder heads. They're a proprietary design all their own. My 520" BBM headed FE makes 744 HP with just a little massage work in the bowl area by Blair Patrick. No port work at all.
|
Thank you the tunnel wedge question worked. I personally am not into who has more horse power than who... I think that 740 HP is excessive for a street car to begin with. But that being said the motor you have is very nice.
I already have a nice set of Shelby heads that will make every bit of 650 HP and 650 torque, however my builder prefers the Blue thunder over the BBM. The BBM is a very nice product and would be my second choice. |
| 767Jockey |
07-17-2020 07:54 PM |
Quote:
Originally Posted by ERA 626
(Post 1479872)
I personally am not into who has more horse power than who... I think that 740 HP is excessive for a street car to begin with.
|
Perhaps it is, but my engine has a special feature. If I only push the gas pedal half way down, it automatically drops it's output down to only 370 HP or so - perfect for those days where I might be thinking that 740 HP is excessive. Then, on days where I want it all, I just press the gas pedal down further, and presto, I have 744 HP. :LOL::LOL::LOL: |
| olddog |
07-17-2020 10:24 PM |
Quote:
Originally Posted by ERA 626
(Post 1479872)
I already have a nice set of Shelby heads that will make every bit of 650 HP and 650 torque, however my builder prefers the Blue thunder over the BBM. The BBM is a very nice product and would be my second choice.
|
Who is paying who for what?
The builder should advise for sure, but wanting you to buy parts that you already have seems wrong to me.
When the builder thinks he is in charge of spending my money, I think I would look else where.
I would feel different if you had junk heads, but you don't. If he cannot make good power from those heads he isn't worth is weight in ..... never mind. I said my piece. |
| Anthony |
07-18-2020 04:49 AM |
Quote:
Originally Posted by ERA 626
(Post 1479845)
i did thank you.
|
I meant the dedicated fe forum , not on this site.
The sidewinder intake is a single carburetor dual plane intake designed such that the intake runners are about equal length, and the carburetor sits a little off center, towards the drivers side , and is named sidewinder because of its appearance.
I think the best fe wedge heads for making power are the high risers. Ford copied the design from mopar max wedge heads. |
FWIW, I had terrible problems with a Blue Thunder FE intake manifold. The distributor hole was bored 1/4" off center. I bought it from "River Racer", a well known Blue Thunder dealer. I called Blue Thunder and talked to the owner, George, I believe. He hatefully accused me of lying and said it couldn't possibly be a Blue Thunder intake. I ended up getting my machine shop to have it welded up and re-bored it to the correct location. That ended any future chance of me buying a Blue Blunder product.
|
| ERA 626 |
07-18-2020 11:17 AM |
Quote:
Originally Posted by olddog
(Post 1479883)
Who is paying who for what?
The builder should advise for sure, but wanting you to buy parts that you already have seems wrong to me.
When the builder thinks he is in charge of spending my money, I think I would look else where.
I would feel different if you had junk heads, but you don't. If he cannot make good power from those heads he isn't worth is weight in ..... never mind. I said my piece.
|
FYI my "builder is a close friend" I am gathering parts for a future build. When you see what Im building you will understand... |
| olddog |
07-18-2020 10:12 PM |
Quote:
Originally Posted by ERA 626
(Post 1479913)
FYI my "builder is a close friend" I am gathering parts for a future build. When you see what Im building you will understand...
|
I was afraid of that, which is why I stopped.
I hope he does well by you and you are happy with the results.
Good Luck |
| All times are GMT -7. The time now is 04:52 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
