Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   In search of an FE Weber intake.... (http://www.clubcobra.com/forums/fe-talk/144390-search-fe-weber-intake.html)

blykins 01-12-2021 04:07 PM

In search of an FE Weber intake....
 
Please contact me with any leads.

brent@lykinsmotorsports.com

5027591431

1795 01-12-2021 05:00 PM

Brent,

Where have you looked, so that we do not all run to the wrong places thing to find one.

MKS427 01-12-2021 05:17 PM

Jim Inglese might be the person to talk to.
Good luck

1795 01-12-2021 05:53 PM

Wow, not having much luck. All of the sites I have gone to have them out of stock, or they are for EFI (Summit and Jegs). I know that someone found a small block weber intake on a Facebook for sale section. You might want to try there, I am not on facebook.

I imagine that you have already contacted Jim Inglese. I know that for my build finding parts has been problematic at times, as the supply has dried up on a lot of engine parts. Will keep looking.

CompClassics 01-12-2021 06:59 PM

Have you tried Pierce Manifolds? That is where I get mine from. If you plan on running power brakes get the manifold that has the valley plenum chamber built into it.

PaulProe 01-12-2021 07:15 PM

Brett
You might give a call to Borla-Johnson City, TN and talk to Chris Roberson (Machine Shop Supervisor), Karen Isaacs or maybe Ed Taylor, if he's still with the company. 423-979-4011

Their manifold is similar to the one available from Pierce, I think it may be from Rousch but that is just a guess.While they use it for Fuel Injection, it is the same as what you would use for Webers.

Paul

blykins 01-13-2021 02:46 AM

Blue Thunder makes the manifolds for Inglese, Pierce, etc. Unfortunately, everyone I've talked to is out because BT is not planning on making anymore until they get an order of 50.

Speedmaster makes one but I'd rather not use that junk.

Anthony 01-13-2021 05:07 PM

So, are you looking for the intake with straight up orientation, or the intake with canted weber mount ?

http://www.clubcobra.com/photopost/d...58mm_Weber.jpg

blykins 01-14-2021 06:02 AM

Borla had an intake.....it's on the way.

Thanks for the links and tips guys.


All times are GMT -7. The time now is 03:27 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: