Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   428 Build. Heads (http://www.clubcobra.com/forums/fe-talk/144468-428-build-heads.html)

bomelia 02-09-2021 12:54 PM

428 Build. Heads
 
Well, its been a long time since I have posted here. But I finally have the financial freedom to do this project. Most of my kids are out of jail now (just kidding)

I am sure Jamo will pick up on this.

Anyways. I have a 428 block. Its been machined and I need to pick out some heads. Thoughts? Iron? Aluminum? Provider? Cost?

Plan to buy Unique body and frame

Mike

saltshaker 02-09-2021 01:54 PM

heads
 
Quote:

Originally Posted by bomelia (Post 1488880)
Well, its been a long time since I have posted here. But I finally have the financial freedom to do this project. Most of my kids are out of jail now (just kidding)

I am sure Jamo will pick up on this.

Anyways. I have a 428 block. Its been machined and I need to pick out some heads. Thoughts? Iron? Aluminum? Provider? Cost?

Plan to buy Unique body and frame

Mike

Trick Flow....
jon

Dwight 02-09-2021 06:27 PM

Last week I pick up a pair of Edelbrock / Craft stage one heads that flow 310 cfm int. and 245 cfm exh. for $1900.

Unique is a great kit and a short drive from Huntsville, as you know.:)
Several Uniques in north Alabama.

Tim has a black Unique he would sell as a roller. If you are interested. Add a motor and tranny and drive.

They have not updated their web site for the new head.

https://craftperformanceengines.com/heads12.html

blykins 02-10-2021 01:57 PM

A set of Trick Flows will run $1920 and will flow 330 cfm out of the box with only a 175cc intake port, at about 32 total timing. There aren't any off-the-shelf heads that are comparable at this point. They come with PAC springs, Crane retainers, etc., or we can sell them with a custom spring package.

We are also doing some porting programs for them that pick them up to 360 cfm with only 5cc intake volume difference.

The out-of-the-box TFS heads on a 445 will make 550 hp/590 lb-ft here. A 465ci FE will make about 700 hp with them here in a bracket race form.

Excellent heads.

incoming 02-10-2021 03:31 PM

Dwight, did the black roller used to reside here in Decatur.

I have a friend who might be interested in the roller.

Dwight 02-12-2021 05:53 PM

No, he is not in Decatur.

email me if you like. algunruner@aol.com

Dwight 02-12-2021 06:09 PM

I found a picture of the Unique in my gallery that Tim is willing to sell as a roller

http://www.clubcobra.com/photopost/d...1255493104.jpg

Dwight 02-13-2021 07:43 AM

Black
 
Quote:

Dwight, did the black roller used to reside here in Decatur.

I have a friend who might be interested in the roller.
Like
I think you are talking about David Wheeler's Classic Cobra. Dual four's, large double roller bar. California car.
He sold it several years ago, retired and moved to Florida. Don't remember who bought it.

Mark O'Neal 02-14-2021 09:52 PM

ProMAXX are about 1500.00 set up for a HFT

Depends on what you want to do with the car.

PDUB 02-14-2021 11:18 PM

Excellent!
 
It has been a while, Mike. I was wondering what was going on. I ran across one of your old posts over on the UniqueCobra.com site. Great to hear that you are going to move forward with your project! When do you think you will get the your stuff from Unique?


All times are GMT -7. The time now is 09:35 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: