|
Photos of my remote oil adapter
1 Attachment(s)
Some time ago I promised to post photos of my remote oil adapter compared to the cheapo cast units that are available. I originally purchased a cast unit, but upon inspection I decided I could do a better job. The main things that I did not like with the cast unit was the high porosity of the casting, and the fact that the ports did not come close to aligning with the holes in the block thus forcing the oil to make several sharp bends, etc.
Here is a photo of my block with the oil ports enlarged and aligned for my new adapter: |
1 Attachment(s)
Here is the cast part:
click on this: http://www.clubcobra.com/photopost/d..._oil_front.jpg to aviod seeing problem image: |
1 Attachment(s)
Here is the back of the same part (the image is flipped appropriately to compare with holes in the image of the block:
click on this: http://www.clubcobra.com/photopost/d...d_oil_rear.jpg to avoid this image: |
1 Attachment(s)
Here is the new adapter:
click on this: http://www.clubcobra.com/photopost/d..._oil_front.jpg to avoid seeing problem image: |
1 Attachment(s)
Here is the back of the new part (flipped image):
click on this: http://www.clubcobra.com/photopost/d...w_oil_rear.jpg to aviod this image: |
Not sure what is going on with the last 4 images. They look fine on my machine with 3 different viewers. After I upload them the look like crap with Netscape, IE, and Opera. I will send Brent an e-mail to check them out.
Stay tuned. Edit: Links above help, but it is nice to see the images together which is possible in the gallery. http://www.clubcobra.com/photopost/i...at=500&thumb=1 The Custom adapter allows the main oil paths to flow directly in and out of the engine. The two 1/8 NPT gauge ports are located on return path (entering engine) and are for dash Smiths gauge and data logging of oil pressure. |
CCX33911
Nice looking remote adapter. Could you make one for me? Regards, Ken |
Hi Ken. I wish I had the time to make it, but I am trying to get the car on the road this summer. You are welcome to the CAD drawing (assuming I can find it). I can also ask my machine shop buddy if he is interested, and how much, etc.
|
| All times are GMT -7. The time now is 08:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: