|
Which Pilot Bearing?
I'm matching an FE to a 5-speed Tremec TKO. The FE is a 427 with a 428 crank. The tranny input shaft is 1-1/8" diameter with 26 splines. I'd like to use a roller-style bearing (but would go with a bushing if a roller isn't available), but have not been able to locate one that matches the requirements.
Any suggestions as to specific brands/part numbers? Thanks. |
pilot bearing
i have basicly same set up.. i got mine from dynamic motorsports..BCA FC-66067 needle bearing pilot for 428 with tremec TKO about $25 talk to mark dove 513-738-4000
|
| All times are GMT -7. The time now is 12:08 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: