Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Question on intake (http://www.clubcobra.com/forums/fe-talk/17446-question-intake.html)

Scott McDowell 05-29-2002 12:41 PM
Question on intake
 
I have an 2x4 alum. intake with no hole in the front for the short water line from the water pump. It looks like someone filled the hole and sanded it smooth. (but I am not sure).
Do I need to have this put back in? Why would it be removed to start with?
Any help is appreciated, thanks.

Mr.Fixit 05-29-2002 06:06 PM
If it wasn't needed, it probubly wouldn't have been there to begin with. For real, I 've been told they won't cool right without them, but never did the experiment myself to verify this. As for why it was removed, maybe it was on an alcohol burning drag motor with no water pump and filled water passages.

COBRAMIKE427 06-14-2002 01:35 AM
IT HAS TO BE THERE SO MARK IT AND DRILL TO 37/64" AND TAP IT TO 3/8-18NPT.THEN GO TO HARDWARE STORE AND GET A 3/8 PIPE STUB 3" LONG THAT IS THREADED ON BOTH ENDS CUT IT IN HALF AND YOU NOW HAVE A SPARE.


All times are GMT -7. The time now is 02:11 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: