|
Aluminum Cylinder Head Choices For FE ???
Guys, What else is there in Aluminum Heads for a 427SO. I know of the Edelbrock Performer, and the Shelby. Who/What else?, and what do you guys like and why?? At this point I am in search of the S/O block, most likely going 428 crank. Street mostly.
Hey Jeff Frigo!.......... What ya usin' in your setup??? |
im going with the shelby heads with stage II porting
|
fe hEADS
Baxter, your best street selection is still the Edelbrock 76CC heads. They can handle 2.190 Intake x 1.655 or slightly larger exhaust valves and this is much better than the Shelby which offers only 1.750" exhaust valve seats in the head...if your cam is very large you will have exhaust valve to cylinder bore problems using the heads the way they sell them. The exhaust seats will need to be changed for the smaller diameter valves you'll end up using if you know to check for the cyl wall clearance issue....if you don't, then later on you will most likely learn this lesson. Dove also offers heads but these wouln't be your 1st or 2nd choice for a street engine like you're describing..
Regards, george |
Thanks George, I feel better now, hearing from an expert like yourself puts my mind at ease about the edelbrock heads. You know how we are always looking for something better, sometimes
we forget about the tried and true. Regards |
FE Heads
Expert?...well maybe lots of experience....at any rate...Shelby heads can be worked to be a great head too...but the Edelbrock geometry is better for what you're doing....not to say they don't also need some TLC to improve them a but too....but much less and they are a safer head to use for most street engines being built by less experienced shops....although I would never use them as they come from Edelbrock assembled....the Valve work and machine practices used by them needs to be improved. Most good shops would prefer to buy bare heads and do the final work themselves...Good luck with your project!
George |
| All times are GMT -7. The time now is 12:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: