|
428 build ?'s
I have some build/compatibilty ?'s. Any help or comments appreciated.
My goal is to build a 427 street (428) Cobra replica as it came off the line with 2003 technology where ever available. I am building a 428 standard block bored 20 over. I need recommendations for the following: 1. Rotating assmebly 2. Heads 3. Cam 4. Valves 5. Oil pump Other then the oil filter mod is there any other oiling mods needed? I have a PI intake and would like to go with edelbrock alum. heads but unsure of compatibily. This will be for street use only and am looking for reliability not speed. Also, this will be a straight pipe car not side exhaust. |
I just did this build. 1968 428PI for my FFR
1. stock crank w/cast .30 pistons & moly rings, cloyes timing set 2. stock heads ported (a lot cheaper the buying edel's) 3. Crane Cam kit http://www.cranecams.com/motorsports/ford/343801.htm 4. stainless valves with hard seats 5. Miloden oil pump/ carter fuel pump PI intake will work with Edel heads. I also went with heavy duty rocker shafts/billet stands from Dennis @DSC Motorsports NEW Clevite7 Main / Cam /Rod bearings. NEW Premium Cast Pistons .30 over NEW Moly Rings NEW ARP Main Bolts NEW ARP Intake Bolts NEW ARP Valve Cover Bolts NEW Crane Camshaft # 343801 NEW Crane Pushrods # 34645-16 NEW Crane Rocker Arms # 34772-16 NEW Crane Valve Locks #99042-1 NEW Crane Valve Stem Seals #99822-16 NEW Stainless Steel Valves NEw DOVE HD Rocker Shafts with Billet Stands/Spacers NEW ARP Oil Pump Drive Shaft NEW Carter Fuel Pump NEW Cloyes True Roller Timing Set Holley 4150 4 Brl 750CFM Dbl Pumper NEW Carb Spacer NEW MSD Distributor #MSD-8594 NEW MSD Blaster 2 Coil #MSD-8200 NEW MSD Coil Bracket NEW MSD Wire Set NEW Alternator- stock NEW Starter- stock NEW Cobra 428 Alum Valve Covers NEW Hellings/Stelling Air Cleaner New Aluminum Turkey Pan |
NFS:
Thanks for the response. I am assuming you got the rotating assemby balanced? What oil mods did you do? |
Go to this forum and search the archives for oiling mods. The subject comes up at least once every month.
http://www.network54.com/Hide/Forum/74182 |
| All times are GMT -7. The time now is 09:34 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: