|
427 alum flywheel
any one using an aluminum flywheel ?I just bought another car,,a shell valley with a fresh 427 from John Chiaccy,,{howeveruspellit}
it's 427 so,.030 over,steel $ crank,arias pistons,10.5,comp 294 cam with roller rockers,new dove high rise top end with new dual 715 holleys,balanced and blue printed,new alum flywheel,my question is the motor dosent seem to rev as fast as I expected,,years ago I had 427s with old style alum flywheels,,if u floor kicked it at idle,,u couldnt get out fast enough to not rev limit it,,this motor is brutal fast at 3500 rpm and up,,but revs like a 390,,any one have input ?thanks,,Tk "burn em if you got em" ar,, |
How about the state of tune - is the timing set properly, carb jetting, etc....
|
| All times are GMT -7. The time now is 05:11 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: