|
FE parts for sale
I'm rebuilding my early 64 427FE block for more compression ratio and horsepower since I've added a Weber induction system. Don't need these items. All are used but in excellent condition. Motor had only 20,000 miles. No problems of any kind.
Here’s what I have and my asking price. (or make offer): 390 crank (3U 3.784” stroke) $400 390 Heads (Ford cast iron – complete. Valve springs replaced Aug 2001. Not run much since) $800 Steel flywheel 184 teeth $150 Intake Manifold for single 4 barrel carb (believed to be Edelbrock Performer) $150 Melling Oil Pump ME57HV with pickup for Cobra aluminum tee pan $50 Ford rods (C6AE-C 6.488” length) $400 Cam Techniques solid lifter cam (new in Aug 2001 : lift 0.561 at valve; duration of 232 deg at 0.050 lift; 108 deg intake C/L ) $150 TRW L2205 pistons $350 Holley 750 w/ Vacuum secondaries (3310) reworked by The Carburetor Shop’s Brad Urban for four corner idling, improved air channels and choke removal $200 Aluminum Turkey Pan $200 That’s the list. Please let me know if you are interested in any of these items. Thanks. |
Things must be looking up.. :-) Try putting them on e-bay as well
|
Michael:
If you mean about getting the engine redone, then I hope you are right. I think they are looking up because the old engine was so weak , the only way to look WAS up. No compression ratio. Maybe in the mid to low 8's:1. New engine will be 10.5:1. Should finally be able to get the Webers to work properly. Then things will be looking up!!!:) ;) :LOL: |
| All times are GMT -7. The time now is 11:17 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: