|
Eagle rods
Do Eagle supply a H-beam rod for direct replacement in a FE engine? Does anyone know the website address?
Can anybody recommend a good hyd. cam for a 428 with edlebrook heads, for a good tick over and a possible 3.07 rear end and w/r toploader. Comp ratio no more than 10:1. thanxs guys |
Comp Cam
My 428 has a Comp 270H THe engine does'nt make a load of HP but the torque is great.. Approx 325hp.. 485 Torque. I know it's not 500 but it runs great... I'm limited by a POS low rise 427 intake.
No Scoop hood.... |
Eagle Rods For Fe are available
Eagle does indeed make a replacement H-Beam rod as a direct bolt in for an Fe. I thought I read in the National Dragster where that particular rod is now a legal replacement for the stock rods in the stock and up classes. I've used them and they are 6.490" long.
|
cobra_dude Eagle makes a bolt in but you want to have the balance checked on the crank assembly when done. Summit and Jegs are within dollar of each other. The weight on these rods is 30-40 grams lighter. You need to check on this. I have a set in my motor and have had no problems. 6,500 rpm limit on my motor. Good luck If you are looking for regular rods, try FFP in Cali, they are into FE parts mostly or put a wanted in here, someone must have a set of FE's in good shape for sale Rick Lake
|
| All times are GMT -7. The time now is 11:51 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: