|
MR 2x4 Throttle Linkage - I'm So Confused!!!
Does anybody have a good picture of how the throttle linkage for a medium riser dual quad goes together? I got a setup from Carl's Ford Parts and very poor documentation. Nothing seems to go where I'd expect it to. Am I missing something?
I have 2 450 CFM mechanical secondary holleys. http://www.chuckbrandt.com/duallinkage.jpg Thanks, Chuck Brandt |
1 Attachment(s)
Is this any help?
|
Chuck,
Send me your e mail address and I'll send you a tighter shot of the linkage. I couldn't resize the immage to post it here if my life depended on it. Take care, Steve stekel@adelphia.net |
Chuck ,
Check my gallery ,I think there is one there that will give you some help. KK |
Thanks KK - your last picture is getting there.
I can kind of see what's going on in your last picture. Looks like I need to make a couple pieces though.
Thanks, Chuck |
Thanks guys - I get it now.
I'm going to have to make a couple of post things but I see how it's supposed to go now.
Thanks for all your help! Chuck |
|
George,
VERY nice motor :D :D |
1 Attachment(s)
try this
|
Here is what I think is needed to complete it.
Here is what I think I need to make a cotter pin stud on my holley throttle arms. Is this a part that Holley or anyone sells? I'm trying to talk my brother into making me some on his lathe. A guy would need two of them, one for each carb.
CDB http://www.chuckbrandt.com/2x4stud.gif |
Holley makes a similar part, uses an "E" clip instead of a pin. The part no is 20-38.
http://www.holley.com/HiOctn/ProdLin...SCA/20-38.html |
Thanks, that's pretty close
Would be easy to turn down the end I think.
Chuck |
Chuck....you can make them...#6 SHCS, nut and 2 washers each..
http://www.gessford.com/cobraparts/i...gePin-DA03.JPG http://www.gessford.com/cobraparts/i...gePin-DA01.JPG |
| All times are GMT -7. The time now is 07:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: