|
Fe Oil Capacity?
What is the approx oil capacity of a 390 FE with standard oil pan and a remote filter? on't want to overfill to start. cb
|
Chiperd WHERE YOUR DIPSTICK:confused: Start with 6 quarts if you have a oil cooler and standard full filter and check the stick. Rick Lake
|
No oil cooler: Dip stick broken-need to get a new one but want to pick yp the oil at the same time. c
|
Chiperd go with 5.5 quarts of oil It will not hurt anything if it's a little too high. Better to have more than not enough Rick Lake
|
Chiperb,
Rick is correct. I think the stock pans held either 4 1/2 or 5 quarts and then you figure in about a quart for the filter if you are running the standard length filter. Put the 5.5 quarts in and run the motor for a few minutes watching your oil pressure and then shut it off and take a look at where the level is. Ron |
Thanks for the info: What weight oil? Should I use Mobil1? See post bellow: oil pressure dropped fm normal 40 to 32 on a trip. Was hot. Fired it up last night and was back to 40lbs at idle after it had cooled down. cb
|
Good question. Do you also take into account the extra oil lines for the external oil filter, then to the oil cooler in front then back to the engine. When the engine is running and oil pumping, just how much has to be left in the engine. Yeah I know enough for the pump to keep sucking it up, but how much more? As I'm getting older, I think I'm becoming a bit paranoid now, so I check it as soon as I turn it off, thinking it hasn't had a chance to drain back in and I'm getting a closer reading of whats in the pan.
What weight oil are you guys running in your FE's. Multi-grade or just a one weighted? Also, if anyone is running a 20-50, and a high volume pump, what is your oil pressure? Thanks, Bob Faust |
| All times are GMT -7. The time now is 03:15 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: