|
Brent,
Using all of Precision Oil Pumps stuff, Edelbrock heads and using ball and ball push rods. Very happy with the outcome. 427 SO engine. I had Doug at Precision get everything I needed, also using his blueprinted oil pump and billet shaft. Very pleased!! |
Michael, I'm using the right stands, as on my last motor, I used stock stands and had the same problem.
Well, I got her up and running again last night; so far so good. I have to say that I noticed immediately a difference in the overall geometry compared to the Harland Sharp rockers, as it appeared to my untrained eye that the because of a better angle, it would logically be more efficient and have less strain on the pushrods. Don't ask me to explain it in detail, as I don't know that I could, and it's just an observation. All in all, I have to say that I am very please with Precision Oil Pumps quality and Doug's service. I am using their billet oil shaft, blueprinted pump, end stands, stands, rockers, and app ball/ball push rods. |
I'm glad to hear your happy with the new set-up! Just mark it down like all of FE Folks do as money well spent on entertainment.
|
The truth will set you FREE
Brent Mills I am gald your motor is fixed. I see you let the cat out of the bag. Poor gemonitry on the rocker set up. Sound like you didnot need to spend that added $600 dollars? They have articles on setting up the Valve train. You should do this still to make sure no binding of the springs, valve hitting pistons, the correct wear pattern on the center of the valves. Have someone check it out before you have the same problem again. Are the new rockers pivot point higher than the old ones? I know you went from cup to ball pushrods to ball to ball , this will give you more angle for the rocker, and help keep the pushrod in place. Hope it's worked out. I guess we will see.:) Rick Lake
|
Could be you had the wrong rockers somehow. Glad it worked out.
|
| All times are GMT -7. The time now is 09:48 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: