|
Thermostat
What are you guys using for thermostats on your FE's? 160, punched out, or...... :confused:
Thanks, Phil |
180 woth a small hole drilled at the top. I used to run a 160, the 180 seems to allow for a faster warm up.
Steve |
Mr Gasket Hi Flow 180 degree thermostat.
Bill S. |
I too like the Mr Gasket 180 deg. thermostat. If you have the earlier style (read big) thermostat housing or header tank the Mr Gasket thermostat listed for big block Mopars will fit.
HTH, Mike |
If your using the earlier large thermostat w/surge tank .The Chrysler fills the bill. same large dia and a large valve like a GM .
|
| All times are GMT -7. The time now is 12:01 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: