-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| pro-st-fairlane |
09-21-2003 03:17 PM |
narling rocker arm shaft
ok i have question i have 390 fe with 12:1 compression pistons 390 heads that have had the valves takin out to 428 cj size and fully race ported triple springs and a 3 angle valve job ...im running ductile rocker arms and having a problem with the rocker arm shaft being narled where the rocker arms ride any ideas on how to fix this and why this is happening?
|
| PatBuckley |
09-21-2003 03:33 PM |
excessive spring pressures. get hardened shafts.
|
| All times are GMT -7. The time now is 04:43 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
