-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
- -
clearance issue?
(
http://www.clubcobra.com/forums/fe-talk/45754-clearance-issue.html)
| pro-st-fairlane |
09-27-2003 08:31 PM |
clearance issue?
i have 12:1 trw pistons with a crane solid lifter cam with a .595 lift in a 390 with a set of 390 heads that have had the valves takin out to 428 cj size valves does anyone know if with running a 1u crank because of the bigger stroke am i going to have any clearance issues?
|
| blown |
09-27-2003 08:59 PM |
you should be fine but its good to check in case the block has been milled a few times .**)
|
| pro-st-fairlane |
09-28-2003 12:47 PM |
the block has not been milled at all
does anyone know if by running the bigger stroke 1u crank does it make the compression go up and does anyone know by how much?
|
| blown |
09-28-2003 09:26 PM |
the only way to know is to measure deck higth remember that all rods will stretch .030 under load .
|
| All times are GMT -7. The time now is 06:24 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
