|
Club Cobra CNC 427 Head Special
We are making a special deal on our cnc ported Edelbrock 427 heads to Club Cobra members. These heads are second to none as far as a bolt on head that will work with stock type intake and exhaust. These are the same heads we have used to make 850HP with our race FE's. The flow numbers are as follows. Intakes lifts .300-215CFM, .400-275CFM, .500-318CFM, .600-350CFM, .700-372CFM, .800-384CFM. Exhaust lifts .300-160CFM, .400-200CFM, .500-230CFM, .600-250CFM, .700-260CFM, .800-270CFM. These heads will have one piece stainless valves, 10 degree titanium retainers and locks, inner spring cups, teflon seal, Comp Cams springs, with the valve job done for either street or strip use. They will be assembled and milled to your desired chamber cc's. The cnc chambers are about 80cc which works good for street applications and can be milled to 68cc with no problem. These heads are being offered for 3395.00 complete for flat-tappet or hydraulic roller applications and 3595.00 for solid roller applications. No one can offer these kinds of flow numbers for this kind of money. I said I would have some good deals for you guys and this is just the start. Thanks Keith Craft
|
| All times are GMT -7. The time now is 09:36 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: