Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   427 service block ? (http://www.clubcobra.com/forums/fe-talk/46298-427-service-block.html)

otto 10-14-2003 06:03 PM

427 service block ?
 
Looking at TO service block, rebuilders slip say's regrind crank and cut for rear main seal. Would this indicate a reverse rotation engine. thanks in advance Bob

FFR428 10-18-2003 07:26 AM

Hey Bob, It's Glenn (FFR1990). does the block have a C6JE or C7JE casting number? If so yes it's a marine block. Can you tell me the casting number? Also these were some of the best "27" blocks made. Cast as a sideoiler but drilled as center or topoiler. Sounds like the crank is a reverse rotation also. Good luck. G.

otto 10-18-2003 08:26 AM

Glenn, block has no numbers but ribs on the side, has CJ7E cyl. heads which i'm told where used in marine app.. Bob

FFR428 10-18-2003 10:00 AM

Yes those pesky service blocks with no #'s. I had a 28 block the same way. Wasn't sure if the 27's were the same. The heads are indeed the marine type and are similar to the low riser type. If the crank is a revese rotation ot should carrie the C5JE-B or C6JE-D casting numbers. These are the 2 i've got listed for the RR marine cranks. Rods are the STD 27 bolt and nut type. Block has the crossbolts yes? Sounds like a good find if the $$$ is not too steep. Hope this helps, G.


All times are GMT -7. The time now is 03:38 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: