-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| leadertape |
10-19-2003 11:27 AM |
428 oil pressure up-date
This has taken me a while but I think I finally fixed my low oil pressure concerns. I replaced a HV oil pump with a HP pump. ( Melling M57HP ) I'm now getting 60 psi @3000 rpms vs. 40 psi with the HV. This is with the engine warm. Oil temp is at 80 degrees C. I would appreciate any comments about this pump replacement. Is there any thing I should watch out for. One thing I'm not sure of, will the distributor and cam gear be a problem with the add pump pressure. Thank all of you for your help. I'm looking forward to your comments.
|
| All times are GMT -7. The time now is 02:19 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
