|
KK ~ I know.......it almost hurts to watch ;) ;)
Brian |
[IMG]http://[/IMG] Hope this worked, I've never been able to post an immage on the thread either. Steve
|
That's about par for the course. Steve
|
1 Attachment(s)
steves engine
|
|
|
I added a few more to my gallery tonight.
|
KobraKarl,
Thanks, I was gong to post one in the car-some day I'll figure it out. Steve |
Toycollector,
The Coupe is done but, still in Ohio, I have not driven it yet. Working through some family problems here at this end and looking to opick it up next weekend , drive it to Nashville and then have it shipped to the West Coast from there. Short answer...I don't know yet!. Tony R. |
Here's mine...
Shelby Arruminum with a 4.250 Velasco crank (482ci), 650 lift roller/solid cam, 850DP, Edelbrock heads, etc. and a bunch of other good stuff all put together by Joe Boghosian. Idles sweetly and runs extremely cool. http://www.gasholes.com/yabbse/galle...ics/Engine.jpg |
And here's Pat Buckley's masterpiece, which was just dropped in to the bay of his MASTERPIECE...
Dry sumped, electric water pump, same crank as mine, but a bit more lift on the cam! http://www.gasholes.com/yabbse/galle...rpics/LNP2.JPG |
Here's where the life blood of Pat's motor resides...note the oil filler popping through the polished body.
http://www.gasholes.com/yabbse/galle...rpics/LNP4.JPG |
Another Big Block:
http://www.clubcobra.com/photopost/s...t=1&thecat=500 |
1 Attachment(s)
Here's what's in my engine bay
|
|
Here is a new pic from this past weekend's car show. If you wear 3D glasses, it actually moves.
|
1 Attachment(s)
One more time:
|
Here's mine.
A 351W with a CompCam roller, Ford Aluminum "Z" heads, Edelbrock RPM intake manifold, 670 cfm Holley carburetor, and MSD distributor and ignition. Rick [IMG]C:\Documents and Settings\rick_shores\My Documents\My Pictures\2003014a.jpg[/IMG] |
Let try that again...
http://www.clubcobra.com/photopost/d...232003014a.jpg |
My gallery has engine compartment picture and pictures from 1965 Sports Car Graphic of original Cobra engines when they were new.
Al |
| All times are GMT -7. The time now is 02:21 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: